How To Get My Foscam F19816p Camera To Record To Pc And Not Sd Card

This article will introduce the procedure of setting upwards a Foscam Hard disk camera to save recordings to a local hard drive on your computer during an alarm triggered event.

On Foscam VMS:

Annotation: Before attempting to login to the camera with Foscam VMS, install your VMS to a none arrangement disk and run it with admin privilege.

Please login to the photographic camera with a estimator via a Foscam VMS before beginning. The figurer that is used should be the one intended for storage of the alert event files.

Pace 1: Setup the Move Detection Settings

ane) Navigate to Settings → Alarm → Motion Detection Menu.
2) Check the checkbox by the Enable choice.
3) Check the checkbox past the Recording option.
4) Fix the detection area the camera will monitor for alarm events.
five) Ready the schedule the camera volition follow to monitor for alarm events.
6) Click the Save button to save the configuration settings to the camera.

Note:
ane) DO Non forget to set the alarm schedule which is indicated in cherry-red.
2) Verify the camera time is right or the camera volition be monitoring for events at the wrong fourth dimension.
3) Practice NOT forget to set the alarm area to monitor which is indicated by the red grids.
Step two: Enable the Local Alarm Recording feature
1) Navigate to More → Preference→ Tape settings.
ii) Check the check box by Enable Local Alarm Recording to enable this characteristic.

Step 3: Setup the Storage Location
1) Navigate to More → Preference → Basic settings .
two) Click on the Browse push button to locate a folder on the local computer'south hard drive to shop the warning videos or choose step 3
three) Manually enter the Drive Letter and path of the storage location where the warning videos are supposed to be stored.
4) Click on the Salve push to save the configuration settings to the camera.

Technical Advisory: DO NOT close the spider web browser window otherwise this volition disable the ability for the camera to store alarm recordings to the local difficult bulldoze.

On PC browser:

Notation: Before attempting to login to the camera with a web browser disable any Pop Upwardly Blocker that may be running. They may interfere with the web browser interface to the camera and make information technology difficult to setup the camera.

Delight login to the photographic camera with a web browser before beginning.
Step ane: Setup the Motion Detection Settings
one)Navigate to Settings → Alert → Motion Detection Carte
2)Check the checkbox past the Enable choice.
3)Check the checkbox by the Recording option.
4)Set the detection area the camera will monitor for alarm events.
5)Set the schedule the camera volition follow to monitor for alert events.
6)Click the Save button to relieve the configuration settings to the camera.

Technical Notes:
i)DO Not forget to set the alert schedule which is indicated in blood-red.
2)Verify the camera time is correct or the camera will be monitoring for events at the wrong time.
3)Exercise NOT forget to set the alarm area to monitor which is indicated by the blood-red grids.
Step 2: Setup the Storage Location
Navigate to Settings → Record → Storage Location
Select FTP from the Recording Location drop down carte.
Click salvage to relieve the configuration settings to the camera.